How to use a rotary cultivator correctly?

With the development of agricultural mechanization, farming machinery has also undergone major changes. Rotary tillers are widely used in agricultural production because of their strong ability to break up soil and flat surface after plowing. But how to use the rotary cultivator correctly is related to the technical level of agricultural machinery operation and a key link in agricultural production.
When the operation starts, the rotary tiller should be in the elevated state, first combine with the power output shaft to increase the cutter shaft speed to the rated speed, and then lower the rotary tiller so that the blades gradually penetrate into the soil to the required depth. It is strictly prohibited to combine the power output shaft or sharply lower the rotary tiller after the blade is inserted into the soil, so as to avoid bending or breaking the blade and increasing the load on the tractor.
During operation, the machine should be driven as slowly as possible, which can not only ensure the quality of the operation, break the soil into fine pieces, but also reduce the wear of the machine parts. Pay attention to whether there is any noise or metal knocking sound from the rotary tiller, and observe the soil breaking and plowing depth. If there is any abnormality, the machine should be stopped immediately for inspection and operation can be continued only after troubleshooting.
When turning at the edge of the field, it is forbidden to work. The rotary tiller should be raised to keep the blades off the ground, and the tractor's throttle should be reduced to avoid damaging the blades. When lifting the rotary tiller, the inclination angle of the universal joint should be less than 30 degrees. If it is too large, impact noise will be produced, causing premature wear or damage.
When reversing, crossing field ridges and transferring plots, the rotary tiller should be raised to the highest position and the power should be cut off to avoid damaging the machine parts. If it is moved to a distant place, the rotary tiller must be fixed with a locking device.
After each shift, the rotary tiller should be maintained. Remove dirt and weeds from the blade, check the tightening of each connection, add lubricating oil to each lubricating oil point, and add butter to the universal joint to prevent increased wear.

SAF Coolest v1.3 设置面板WGFSX-ZBUY-ZVAAE-ZEW

图片ALT信息： Nanchang Globe Machinery Co., Ltd.

营业执照及SEO链接： Business license

无数据提示

Sorry, there is currently no content in the current column!

You can view other columns or return to the homepage

NEWS

How to use a rotary cultivator correctly?

SAF Coolest v1.3 设置面板WGFSX-ZBUY-ZVAAE-ZEW

无数据提示

V1.3.1 SVG图标库请自行添加图标，用div包起来，并命名使用